Diamond Certified Blog

Diamond Certified Experts: Home Maintenance How-Tos

While some aspects of home maintenance are best left to a professional, there are many you can address yourself. Photo: Duncan Plumbing Ent., Inc. (2015)

While some aspects of home maintenance are best left to a professional, there are many you can address yourself. Photo: Duncan Plumbing Ent., Inc. (2015)

Owning a home requires a fair amount of maintenance to keep things looking and functioning optimally. While some maintenance tasks are best handled by professionals, there are plenty of others you can perform yourself, even if you’ve never done them before. To highlight a few of these, we asked four Diamond Certified Expert Contributors to share their tips on DIY home maintenance.

How to fix a swinging door: Dennis Thompson of Thompson Construction
If a door in your home tends to swing open or closed, you might be surprised to learn that a simple adjustment can make a huge difference. First, remove a pin from one of the door’s hinges. Place it on a hard surface and hit it with a hammer to give it a slight bend in the middle. When you return the pin to its hinge, its bent angle should create enough resistance to keep the door from swinging. Be aware that you may have to repeat this step with two or even all three pins to completely resolve the problem.

To get your windows clean and smudge-free, you’ll need to use the right tools and methodology. Photo: Crystal Clear Window Cleaning, LLC (2015)

To get your windows clean and smudge-free, you’ll need to use the right tools and methodology. Photo: Crystal Clear Window Cleaning, LLC (2015)

How to properly clean a window: Joe Velasquez of Crystal Clear Window Cleaning, LLC
If you end up with smudges whenever you clean your windows, it’s time to rethink your technique. While the actual cleaning is pretty straightforward, many people encounter problems during the drying stage. A squeegee is a great tool to use—unlike a towel, it won’t leave behind smudges or lint. Starting at the top of your window, apply your squeegee at a slight downward angle and move it horizontally from one side to the other. To avoid the risks involved in using a ladder, get an extension pole that attaches to your squeegee for accessing hard-to-reach areas.

After completing your first pass, start from the top again and move your squeegee over the window in a brisk, fanning motion to displace any leftover moisture. Finally, use a towel to wipe the inner perimeter of the frame, which will prevent beading or dripping from the corners of the window.

How to remove a recurrent carpet spot: Scott Sunkel of Start Fresh Restoration & Carpet Connoisseurs
If you have a carpet spot that reappears after repeated cleanings, don’t give up before attempting the following procedure. First, take a warm, wet, wrung-out towel and work from the outside of the spot toward the middle, wiping in one direction all the way around. Intermittently alternate to cleaner sections of the towel as you go—this will remove any residual dirt and grime that’s locking in the stain.

If you have a carpet stain that just won’t quit, a three-step procedure can provide an effective solution. Photo: Start Fresh Restoration Cleaning & Carpet Connoisseurs (2015)

If you have a carpet stain that just won’t quit, a three-step procedure can provide an effective solution. Photo: Start Fresh Restoration Cleaning & Carpet Connoisseurs (2015)

Next, neutralize any residual chemicals from prior spot cleanings. Use a mister filled with a 50/50 solution of vinegar and water to spray over the surface of the spot. Use a dry towel to wipe with the same motion as before. Finally, rinse the vinegar and water out of the carpet by wiping around the spot with a new, wet, wrung-out towel. If done properly, these steps should put a stop to your reappearing spot.

How to replace a water heater anode rod: Scott Duncan of Duncan Plumbing Ent., Inc.
Comprised of either magnesium, aluminum or aluminum/zinc alloy, a water heater’s anode rod serves a single purpose: to attract and absorb corrosion so the tank doesn’t. After years of sustained subjection to corrosive activity, however, an anode rod ceases to fulfill its primary function, which is why it’s important to replace it on a regular basis (typically every four to five years).

Fortunately, this is something you can perform yourself. After shutting off the water to your water heater and disconnecting the supply line, use a pair of pliers to unscrew and remove the anode rod. Typically, the rod’s hexagonal head will be visible at the top of the water heater—if you have trouble finding it, consult your owner’s manual. Once the old rod is out, drop in the new one and tighten it in place with your pliers before reconnecting the supply line and turning the water back on.

To learn more about home maintenance and other topics, visit experts.diamondcertified.org.

Posted in Consumers, Diamond Certified Experts, Home Tips | Tags: , , , , , , , ,

Share With your friends
About The Author
James Florence

James Florence is Senior Writer at American Ratings Corporation. He can be reached at (800)738-1138 ext.323 or [email protected]

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>